I am thinking of going topless!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
porkflap

porkflap

New Member
Posts
75
Location
derbyshire
I am thinking of getting a full canvas top and the hoop set proberly from paddocks as its just down the road from me. roughly how lonk should it take to remove the hard top and sides and fit the shiny new bits?

also i have a swing away wheel carrier fixed to the rear door that swings when the door is opened! to to retain this i am going to chop the top off the door and fit hooks for the rear flap of the rag top to attach to has anybody had a go at this particular configuration?... anyway is should make for a fun time over christmas!

any advice/ pics would be super

Chris
 
If yer want it yer can have it for half that as I've got no use for it it's faded but intact and useable with a two small holes in it that would easily patch,about the size of 50p pieces.
 
thanks for the offer!, i am after a full one both paddocks and exmore trim say its will be about 4 weeks till i can pick it up as they are made to order bugger, might have it as a easter job rather than a christmas job!
 
Hi


£299 for the hoop set and £170 for the tilt.... Why are they called a tilt?

thats from paddocks and they take 4 to 6 weeks
i rang Exmoor trim but they were more expensive
gonna do it to mine around easter i think

Chris
 
porkflap said:
Hi


£299 for the hoop set and £170 for the tilt.... Why are they called a tilt?

thats from paddocks and they take 4 to 6 weeks
i rang Exmoor trim but they were more expensive
gonna do it to mine around easter i think

Chris
Click to expand...
afaik it comes from the days of horse drawn carriages and whatnot. the top cover/roof on some of em just tilted back out the way, if yer fancied some sun on yer face.
 
porkflap said:
I am thinking of getting a full canvas top and the hoop set proberly from paddocks as its just down the road from me. roughly how lonk should it take to remove the hard top and sides and fit the shiny new bits?

also i have a swing away wheel carrier fixed to the rear door that swings when the door is opened! to to retain this i am going to chop the top off the door and fit hooks for the rear flap of the rag top to attach to has anybody had a go at this particular configuration?... anyway is should make for a fun time over christmas!

any advice/ pics would be super

Chris
Click to expand...

instead of cutting your door, have a look at fitting a drop down tailgate. should be possible to hinge it at the sides surely? its got the hooks for the top. could you not fix the swing away thing to the tub? mines been done like that.
 
well know i know why its a tilt... i didnt know it would be that obvious!

thanks
thats not a bad idea... i think there is a tail board from a series knocking about in my mates garage
 
You must log in or register to reply here.

Similar threads

A
Canvas Cover Question
Replies
8
Views
543
ANK84
A
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
M
Drove through 2 feet of water, next day, clunking/sputtering when turning left/right slowly?
2 3
Replies
45
Views
2K
Stanleysteamer
Stanleysteamer
Hammer'n'tongs
Tyres wearing unevenly:- Axle ends out of alignment
Replies
9
Views
1K
Hammer'n'tongs
Hammer'n'tongs
A
Freelander 1 Now we are 2.
Replies
19
Views
1K
Alex1000
A
Back
Top