fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
No they were my parts , I had been stockpiling bargain parts since I got involved with the green oval, good job lol
I am really fooked now, urgent help please (and its not a p38!)
- Thread starter fett
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Beast o Bodmin
Banned
- Posts
- 17,157
wot u want?
Im moveing ooose so its clearout time,got a few engines gearboxes various heater matrixs few looms.other parts and lots of disco bits.....
I just cant chuck nothing out except rust.
could probably dig out a nice set of disco steels so you can fit wide tyres.7" 16s
Beast o Bodmin
Banned
- Posts
- 17,157
how about a nice manual box for your rot rover or prehaps some apillar lower half replacements...
Beast o Bodmin
Banned
- Posts
- 17,157
how about a tdi....
- Posts
- 1,205
- Location
- The Flat lands of Cambridgeshire
Oi oi
you got a R380 gearbox in your pile of spares
or the bell housing between 2.5 bmw and said gearbox
you got a R380 gearbox in your pile of spares
or the bell housing between 2.5 bmw and said gearbox
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
I wouldnt mind the a pillar bits, they genuine replacement panels, or fit over the top?
Front inner wings?
3.9 motor suitable for rebuild but not cracked or snapped anywhere?
transfer box for my 3.9 auto?
Drivers side elecric mirror?
Sill replacements?
Very good dizzy for my 3.9 auto (1990)
Will you supply, fit and get cert for LPG kit?
They all need to be dead cheap but very good!
Beast o Bodmin
Banned
- Posts
- 17,157
Beast o Bodmin
Banned
- Posts
- 17,157
I wouldnt mind the a pillar bits, they genuine replacement panels, or fit over the top?
Front inner wings?
3.9 motor suitable for rebuild but not cracked or snapped anywhere?
transfer box for my 3.9 auto?
Drivers side elecric mirror?
Sill replacements?
Very good dizzy for my 3.9 auto (1990)
Will you supply, fit and get cert for LPG kit?
They all need to be dead cheap but very good!
4.0 on carbs 150 kmiles on gas ready for build 150 quids +post at 150 quids.
A pillar replacement bottoms 35 the pair +post(15 top)
Dizzy eletric new cap good leads 50 +post.
Lpg kit 150 +post fit yer self i told u that all ready,scrap yard stuff is up to you.
fit a manual ya daft bugger auto sucks.
Cash only.Recorded delivery.
all stuff is up to you.second hand stuff no warranty take yer chances.
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
which dizzy is it?, how many miles?
Beast o Bodmin
Banned
- Posts
- 17,157
lucas i think can look in morning.was fine in mine when removed.new cap at service.miles.....yes.......
Beast o Bodmin
Banned
- Posts
- 17,157
80kmiles or so.lucas.pillars are replacement parts with lr stickers on.
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
What happned to your tipper fund?
I can get a brand new one from Paddocks for £125 at the moment so whats your best price for the dizzy? Is it an 8 or 9 mld?
Can you send me a pic of those panels as I managed to make them up last time, if yours are better I might think about it
I can get a brand new one from Paddocks for £125 at the moment so whats your best price for the dizzy? Is it an 8 or 9 mld?
Can you send me a pic of those panels as I managed to make them up last time, if yours are better I might think about it
Beast o Bodmin
Banned
- Posts
- 17,157
ang on ill go snap one..
Beast o Bodmin
Banned
- Posts
- 17,157
ere,dizzy is at ralphs metro project.he used it to test his was the culprit.it worked so his was fooked.He got a pimp one,can call him but its fine.can get it tonight or after xmas up to you,
IMG_0166 on Flickr - Photo Sharing!
IMG_0168 on Flickr - Photo Sharing!
IMG_0169 on Flickr - Photo Sharing!
IMG_0166 on Flickr - Photo Sharing!
IMG_0168 on Flickr - Photo Sharing!
IMG_0169 on Flickr - Photo Sharing!
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
I didnt understand a word of that mate
Ok so one, are those panels designed to welded in over the top of what there with no cutting?
Two make the dizzy cheaper!
Ok so one, are those panels designed to welded in over the top of what there with no cutting?
Two make the dizzy cheaper!
Beast o Bodmin
Banned
- Posts
- 17,157
you iz daft.I didnt understand a word of that mate
Ok so one, are those panels designed to welded in over the top of what there with no cutting?
Two make the dizzy cheaper!
cut out the ****e and replace.
dizzy price is as stands.
- Posts
- 83,310
- Location
- Embasinga stocæ
Beast o Bodmin
Banned
- Posts
- 17,157
no but equally as annoying...
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
oi!- no deal
where the hell you from anyway talking like a yokle! lol
where the hell you from anyway talking like a yokle! lol
Beast o Bodmin
Banned
- Posts
- 17,157
