Hybrid defender body to range rover 91 chassis lower steering column to steering box.
- Thread starter cljcars
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hicap phill
Well-Known Member
- Posts
- 15,417
- Location
- Wiltshire
That’s off an early 90/110.
Disco/Range Rover are all the same splines but are slightly different in designs.
What are you trying to do?
(Only asking as others may have ideas and help)
Disco/Range Rover are all the same splines but are slightly different in designs.
What are you trying to do?
(Only asking as others may have ideas and help)
It needed lengthening by 1/2 inch to engage properly, so the plan was to cut, sleeve and weld it. Anyway, in a rush to get it together the end was crushed in the press.... It would be good to get one that doesn't have the nuckle in it. I can cut and shut if too short but I would rather not.
Thanks for the info, if the splines are the same it gives me option. Much appreciated.
Last edited:
Hicap phill
Well-Known Member
- Posts
- 15,417
- Location
- Wiltshire
Early range rovers don’t have the knuckle in the middle & are straight bars. Easier to cut & lengthen.
Also the make diffent length ujs
Thanks for that, there seem to be loads of the RR ones for sale. Looks like a better fit and if not easy to lengthen.
Similar threads
