Hub assembly torque

D90mitch · Apr 6, 2015

Can someone please give me the torque settings for a D1 rear axle for the bolts that hold the drive flange on the half shafts and the ones that hold on the brake disc?

Cheers.

robbh · Apr 6, 2015

Really tight, and really effin tight!

48lbf ft or 65NM for the drive flange and
54lbf ft or 73NM for the brake disc bolts.

I use loctite on both.

markSX · Apr 6, 2015

I use,

T = tight
FT = F'ing tight
YT = Yorkshire tight
After YT comes,
L = loose, you've snapped or stripped the fecker

robbh · Apr 6, 2015

markSX said:
I use,

T = tight
FT = F'ing tight
YT = Yorkshire tight
After YT comes,
L = loose, you've snapped or stripped the fecker

:lol:

D90mitch · Apr 7, 2015

Done it cheers

DiscoPol · Apr 7, 2015

Surely its RFT (really fookin tight)

i use this setting for most things

markSX · Apr 7, 2015

RFT = YT.

Nothing is tighter than a Yorkshire man.

Hub assembly torque

D90mitch

Well-Known Member

robbh

Crazier than a box of frogs on acid

markSX

Active Member

robbh

Crazier than a box of frogs on acid

D90mitch

Well-Known Member

DiscoPol

Well-Known Member

markSX

Active Member

Similar threads