how to tell a lt77 from a r380 anyone

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
killnorton

killnorton

New Member
Posts
105
Location
worksop
can any one tell me a quick way to tel the dif between a lt77 and a r380 box
SOME ONE SED YOU CAN TELL BY THE REVERS GEAR BUT HE DID NOT NO WICH WAS WICH
 
ere Take 5
on the lt77/r380 box subject.......
fitting one to a series - yu have to change the props dont ya? Neither are a straight fit are they?
 
From what I recall, rear prop is 3" longer an front one is a bit shorter than normal. If you know a decent fab shop, buy longer ones and they can shorten them for you - not ideal but it works.
 
From what I recall, rear prop is 3" longer an front one is a bit shorter than normal. If you know a decent fab shop, buy longer ones and they can shorten them for you - not ideal but it works. Oh, and you need MTF95 oil in the box - do a search on here for equivalent part nos.
 
I think it's called the 380 coz it's rated to 380 nm of torque (or poss lbft, not sure) - with the output of the engine normally around 2/3 of that from memory?. Dunno if that's why the 230's called the 230 though!
 
the r380 is much better . the lt77 is quite lumpy and very rough . the r380 is nice n smoove and the synchromesh seems alot better
 
You must log in or register to reply here.

Similar threads

Henry.adams
Lt77 and r380
Replies
1
Views
395
miktdish
miktdish
Rougharse Racing
Replace R380 input shaft.
Replies
6
Views
274
Brown
Brown
D
R380 Gearbox Input Shaft Question .
Replies
1
Views
545
tottot
tottot
M
Discovery1 lt230 in place of LT230R from a 12D?
Replies
3
Views
399
MrF
M
M
Pump to the steering box pipe
Replies
4
Views
472
mma59
M
Back
Top