tomke92z
Member
- Posts
- 37
- Location
- Warsaw, Poland
How do I take out the headrest?! No matter how hard I pull, it won't come out. How do I unlock it?
Disco 1 How to take out this freaking headrest?!
- Thread starter tomke92z
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tomke92z
Member
- Posts
- 37
- Location
- Warsaw, Poland
Ok, I didn't expect that but I need to cut through the foam. Explained here:
The thread can be closed.
The thread can be closed.
- Posts
- 24,287
- Location
- In the next Glen
No need to cut the seat open to remove them.
You can remove the headrests by getting a longish prybar..put it between the headrest & seat hold it against one of the
metal rods & whack it upwards with a hammer to release one side then do the other.
Ive done loads of them.
You can remove the headrests by getting a longish prybar..put it between the headrest & seat hold it against one of the
metal rods & whack it upwards with a hammer to release one side then do the other.
Ive done loads of them.
sierrafery
Well-Known Member
- Posts
- 18,285
- Location
- Arad/Romania
+1^^^ ... brute force carefully applied to the right point each side is enough, i used arm jack tools one at a side and they came out but you can lift consecutively one side at a time step by step
this type
Attachments
Last edited:
tomke92z
Member
- Posts
- 37
- Location
- Warsaw, Poland
Thanks a lot, guys! I read your replies too late and had already cut my seat. But I understand that if I had just pulled it with a jack or a pry bar, I would have removed the headrest along with the plastic parts that normally stay inside the seat when you first remove the metal plate? I'm asking because I have another seat to take care of 
