1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

How To: Clutch remote bleed

Discussion in 'Technical Archive' started by joe27979, Jul 15, 2014.

By joe27979 on Jul 15, 2014 at 7:54 PM
  1. joe27979

    joe27979 Well-Known Member

    Joined:
    Jun 1, 2009
    Posts:
    1,349
    Likes Received:
    7
    Location:
    west Norfolk
    had issue bleeding my clutch, I tried reverse bleeding, power bleeding, vacuum bleeding etc etc as well as a few other known methods.

    I decided to make a remote bleeder.
    You will need:

    2 x 3/8 unf 24tpi make brake pipe nuts
    1 x 3/8 unf joiner
    1 x length 3/16 copper pipe
    1 x bleed nipple

    cut pipe to length required and put one nut on before flaring the end with your fav brake flare tool.
    fit this to the joiner and screw in bleed nipple to other side if joiner:

    [​IMG]

    do same the other end:

    [​IMG]

    you'll end up with this:

    [​IMG]

    fit one end to your slave cylinder:

    [​IMG]

    and other end to bulkhead:

    [​IMG]

    bleed anyway you prefer without crawling under your landy :)

    mine bled first time after install, hope this helps
     
Tags: this article has not been tagged

Comments

Discussion in 'Technical Archive' started by joe27979, Jul 15, 2014.