how do you wire brake lights??

taylorslandy72 · Sep 9, 2013

Hi, been carrying out a fair bit of wireing on the landy recently, only being possible with you guys answering my posts, any pointers to how the brake lights are wired to pedal etc. Thanks

mrchurchill109 · Sep 9, 2013

You DO have a schematic, right? Follow that and you won't go wrong.

In general it's a simple circuit. Switched +12 to the switch (either on the tower in a later truck or on the 5-way junction on the chassis on earlier trucks) then switch lead to the lights in parallel.

ajr

oxides · Sep 9, 2013

Wire (green) from terminal 8 on the fusebox to switch (there are a couple of options depending on whether you have a servo or not) then to the lights (green and purple), lights earthed back to bodywork.

taylorslandy72 · Sep 9, 2013

oxides said:
Wire (green) from terminal 8 on the fusebox to switch (there are a couple of options depending on whether you have a servo or not) then to the lights (green and purple), lights earthed back to bodywork.

Thanks mate, I'll give it a go

how do you wire brake lights??

taylorslandy72

Active Member

mrchurchill109

Active Member

oxides

Well-Known Member

taylorslandy72

Active Member

Similar threads