hot seat

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

adafish

New Member
Posts
77
Now the cold weather is upon us,its time to press the seat heaters on the P38,THE ONLY THING THEY DON'T WORK........!!the lights come on but no heat....is it common for them both to stop working at the sametime or could it be a relay prob{if so,where are they}.....your help would be appreciated...ADA
 

Attachments

  • daddies bling car 017.jpg
    daddies bling car 017.jpg
    79.6 KB · Views: 163
Common fault, the design of the heater element in the seats has been changed by LR to correct it on later models.

The heater elements are only wires and repeated movement on the seat causes them to eventually break.

The solution - a replacement heater element, available on-line from sites such as paddock. Alas the replacement is not easy (so i am told). It requires the seat to be removed and completely stripped to change out the element. :eek:

Also if one fails (not sure which one) it will prevent power getting to the other. A voltage meter may help in this respect.

Hope this helps.
 
Back
Top