sparky1977
New Member
- Posts
- 3
Hi All,
Unfortunatly while on the way to visit the inlaws I suffered a split in the hose going from the heater in the cab to the heater in the back of the Ambulance. I am going to bypass the heater in the back and just connect the cab heater back to the head but I want to buy new hose for this job. As the Ambulance is at the inlaws (I could not risk the drive home with water coming out as fast as I could put it back in) I need to know what diameter this hose should be?
I assume that the job is a simple as taking the feed that goes from the heater in the cab and under to the heater in the back and just connecting it to where the feed from the back goes back into the head?
I know this may seem a silly question but it is allways best to ask just in case...
By the way it is a 200TDI from a discovery 0n a 94 plate.
Thank you in advance.
Mark
Unfortunatly while on the way to visit the inlaws I suffered a split in the hose going from the heater in the cab to the heater in the back of the Ambulance. I am going to bypass the heater in the back and just connect the cab heater back to the head but I want to buy new hose for this job. As the Ambulance is at the inlaws (I could not risk the drive home with water coming out as fast as I could put it back in) I need to know what diameter this hose should be?
I assume that the job is a simple as taking the feed that goes from the heater in the cab and under to the heater in the back and just connecting it to where the feed from the back goes back into the head?
I know this may seem a silly question but it is allways best to ask just in case...
By the way it is a 200TDI from a discovery 0n a 94 plate.
Thank you in advance.
Mark
