Hi new to this forum and hope someone can help ,I have a td52003 which has started rising way up at the back ,to what I would say was maximum height even when driving which is concerning to say the least,it takes maybe a week to go back down which means not being able to drive it ,there is also a weird rumbling from compressor any info please
High rise
- Thread starter Marty67
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
elsie
Well-Known Member
- Posts
- 1,300
- Location
- the very wonderfull Conwy Valley
:dnfnoob::violent:
Intro please
Intro please
matthew2riches
New Member
- Posts
- 3,025
- Location
- Suffolk
Hello to you too 
50 pence
New Member
- Posts
- 1,471
- Location
- Cambridgeshire
More than likely your ride hieght sensors are shot and not sending the correct information back to SLABS ecu,
which in turn, is not shutting off your compressor,
which in turn, is over inflating your air springs,
which in turn, has the possibility of blowing your air springs up,
which in turn,is burning out your compressor, making it sound bad.
I,d say you are looking at 2 new sensors @ £30.00 each, and probably a replacement compressor @ around £100.00.
Hope this helps.
( and welcome to the forum ! ).
Del.
sierrafery
Well-Known Member
- Posts
- 18,284
- Location
- Arad/Romania
^^^ +1 for all the above ...unplug all connectors in the compressor housing ASAP
1968unclefester
New Member
- Posts
- 430
- Location
- faversham kent
spring conversion
1968unclefester
New Member
- Posts
- 430
- Location
- faversham kent
there is a good how to guide for disco air at top of page
