P38A Hi there

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Engine disabled

  • Help

    Votes: 1 100.0%
  • Imfo

    Votes: 0 0.0%

  • Total voters
    1

Zoe Pitters

Member
Posts
10
Location
Romford
Hi my p38 range diesel has engine disabled tried wma code with no joy could it be due to abs fault. Key remote not worked but never been a problem b4 it flashes but does not do cental locking. I' at loss. Any ideas please x
 
Nothing to do with abs, it needs the eka code entering.
If it won't enter by following the method in the book to the letter then the cdl microswitch in the lock pack could be faulty.
 
If Mozz cannot help then it will require a syncmate or similar to get it going.

Don't know of any members with diesel diag near Romford though.

Syncmate cannot clear "Engine disabled" message on dash, that requires EKA code. Fob cannot be synced until correct EKA has been entered and accepted.
 
thanks wammers , I already have someone nr Romford who has a syncmate , at moment need to check if brand new battery is fully charged ??? then keep re-trying eka code imput ,,,, will persevere , hope to find nanocom local ... cheers wam ...mozz
 
thanks wammers , I already have someone nr Romford who has a syncmate , at moment need to check if brand new battery is fully charged ??? then keep re-trying eka code imput ,,,, will persevere , hope to find nanocom local ... cheers wam ...mozz
Thanks for all your help mozz, just waiting to get lock micro switch checked as lights sometimes don't flash when putting in eka code x
 
Here is a test sheet for the lock that martyuk put together if its of any help.
 

Attachments

  • P38 Door Latch Tests.pdf
    90.3 KB · Views: 112
Back
Top