hi lo lever

janderson41 said:

Wee bit of advice.Cannot engage low box. This has just happened,usually try lowbox about every 6/8 weeks and take run round the village. Can still engage difflock but lever will not go forward. Have sprayed as best i can underneath.
Problem,how do i remove cover round hi lo lever. Have searched,googled,read Haynes.
Is it just brute force? Don,t want to break something i then have to replace.
Have tried pulling from each end,screwdriver under edge. This to allow me access to top of box for lubrication or attack with hammer.
Any suggestions please

Jim A
_----_-----
1996 300 Tdi auto(Jap reimport)

Click to expand...

janderson41 said:

Wee bit of advice.Cannot engage low box. This has just happened,usually try lowbox about every 6/8 weeks and take run round the village. Can still engage difflock but lever will not go forward. Have sprayed as best i can underneath.
Problem,how do i remove cover round hi lo lever. Have searched,googled,read Haynes.
Is it just brute force? Don,t want to break something i then have to replace.
Have tried pulling from each end,screwdriver under edge. This to allow me access to top of box for lubrication or attack with hammer.
Any suggestions please

Jim A
_----_-----
1996 300 Tdi auto(Jap reimport)

Click to expand...

janderson41 said:

No,not tried to remove whole consul. Thought if i could remove cover from hi lo lever i could ger enough access. Really have horror about removing great big bits

Jim. A

Click to expand...

janderson41 said:

No,not tried to remove whole consul. Thought if i could remove cover from hi lo lever i could ger enough access. Really have horror about removing great big bits

Jim. A

Click to expand...

janderson41 said:

Thanks again for the quick replies.
Will have a go tomorrow if SWMBO is agreeable to not go shopping

Cheers

Jim A
---_---------
1996 300 Tdi auto. (Jap reimport)

Click to expand...