Parisien
New Member
- Posts
- 526
- Location
- Co Fermanagh, N Ireland
Noticed this over the last few weeks, once over 2000 revs its fine, thoughts?
P
P
Hesitates around 1500rpm
- Thread starter Parisien
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
Whats your in tank fuel pump condition like? Think there is another thread goin on atm about a similar thing might be worth a look 
W
W
Parisien
New Member
- Posts
- 526
- Location
- Co Fermanagh, N Ireland
No idea, not checked it yet, can it be checked physically or with a diagnostic test?
P
P
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
you need to do a fuel flow check, think the instructions to do this are in the How To section...
Parisien
New Member
- Posts
- 526
- Location
- Co Fermanagh, N Ireland
Ok, cheers, will see what turns up
P
P
biketeacherdave
Well-Known Member
- Posts
- 4,979
- Location
- south east london
drive faster
- Posts
- 16,482
Petrol or Diesel??
Helps to know!
Helps to know!
Parisien
New Member
- Posts
- 526
- Location
- Co Fermanagh, N Ireland
2000 4.6 .........
p
p
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
Saints your man I'm an oil burner my self
jacckk
Active Member
- Posts
- 321
- Location
- Durham, UK
Have you plugged in diagnostics? That's what I would do first to see there are any faults.
Parisien
New Member
- Posts
- 526
- Location
- Co Fermanagh, N Ireland
Ok, will do, cheers, just in case there was a known issue and instant fix, maybe hold off til Saints passes by
P
P
biketeacherdave
Well-Known Member
- Posts
- 4,979
- Location
- south east london
clean ur maf sensor
Parisien
New Member
- Posts
- 526
- Location
- Co Fermanagh, N Ireland
Think it was cleaned not long ago ie 2000 miles, will double check
P
P
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
I know we are talking Petrol here but my Diesel P38 was very slow (slower than normal) i cleaned the MAF and my god it felt like it had been mapped
Datatek
Well-Known Member
- Posts
- 46,004
- Location
- Near Poitiers SW France
Don't tell WammersI know we are talking Petrol here but my Diesel P38 was very slow (slower than normal) i cleaned the MAF and my god it felt like it had been mapped
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
Lol good point Datatek I ment I cleaned my EGR UNIT and now it works great
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Nice bit of back peddling mate, it would only start them off again.Lol good point Datatek I ment I cleaned my EGR UNIT and now it works great
rewmer
Well-Known Member
- Posts
- 2,082
- Location
- Clacton, Essex, UK
Try pressing the sport button. See if that makes a difference . Just go with me on this one.
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
Nice bit of back peddling mate, it would only start them off again.
Me back peddling no no no... I ment EGR all along often get my Es and Ms mixed up...
Datatek
Well-Known Member
- Posts
- 46,004
- Location
- Near Poitiers SW France
Now do the inlet manifold and then disconnect the vacuum tube to the EGR, this disables the EGR and stops the crap getting into the manifold and engine. Block the tube with an M5 screw.Lol good point Datatek I ment I cleaned my EGR UNIT and now it works great
