So, was going to do my horns today after the issues with them going off on there own.. Fitted new relay after letting the area dry (in this heat not a prob)
Went to start it up.. gearbox/transmission failure etc.
Thought, been here before, so fluke across the battery and its at 10.5v
checked the pots and one bank a little low in comparisson, so topped them all up, jump leads on and left it for a while.. Still not getting the right voltage, even with jumps connected..
I have managed to get it to 12v at one pint, but just get the click click click when trying to start.
Question is :- Replace Battery? ot dodgy starter motor?
Need an urgent response if possible as shops shut in an hour
Thanks
Went to start it up.. gearbox/transmission failure etc.
Thought, been here before, so fluke across the battery and its at 10.5v
checked the pots and one bank a little low in comparisson, so topped them all up, jump leads on and left it for a while.. Still not getting the right voltage, even with jumps connected..
I have managed to get it to 12v at one pint, but just get the click click click when trying to start.
Question is :- Replace Battery? ot dodgy starter motor?
Need an urgent response if possible as shops shut in an hour
Thanks