Help!!!
- Thread starter Camshaft
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
landy001
New Member
- Posts
- 22
- Location
- chatham kent
this is straight forward,i just unbolted mine and out they come,should take no more than 30 min,i
The actual removal is easy four nuts and the seat drops out. The problem is this will release the spring and render the refitting almost impossible.
RAVE shows a bracket made of wood that keeps the spring in tension and holds the fixing brackets in place. The bracket is quite complicated. I used two metal plates and these seem to have worked however I have not jet replaced the seat so may find this is not the case.
If you can get a copy of the rave instructions this is the way to go.
RAVE shows a bracket made of wood that keeps the spring in tension and holds the fixing brackets in place. The bracket is quite complicated. I used two metal plates and these seem to have worked however I have not jet replaced the seat so may find this is not the case.
If you can get a copy of the rave instructions this is the way to go.
biggeeeee
Retired - Living the dream
- Posts
- 11,090
- Location
- Lanarkshire or Argyll
Similar threads
