help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
MundyBoy

MundyBoy

New Member
Posts
7
Location
South Queensferry
Hey, can anyone help?

I haven't had the money nor time to spend on me disco and am looking to start adding bits, where's a good cheap place beside fleabay to get stuff such as protection lift kit etc, also anything to look for/at when buying a lift kit?


Thanks :D
 
here's a idea

how about getting a job, or another job to help pay fer yer parts rather than virtually begging ?

or, seeing as you are a so called poor student why not get a car that you afford to run ?

sorry if you think my ideas are a bit too "left field" i do appreciate that the concept of working might not have been on yer curiculum just yet
 
i'm not looking for a third job, and i not begging at no point do i ask for any money, so please less of the spamming and could you maybe answer the question i asked??
 
Treworgey 90 said:
ear - did yer get outta wrong side of bed this mornin sean?
Click to expand...

no i is in a really good mood today - me 110 passed it's MOT yesterday and me pair of front dumbirons are turning up today so i have an excuse to get the gas axe fired up :)

but things like this do pee me orf
Disco Project

gerra job earn money buy things ! - that's how life is
 
my disco has suspension lift which was on wen i purchased, apparently its a common mod. the rear springs have been put on the front and 110 rear springs fitted to the rear. (i think) front shock turrets cut and rewelded and rear shock mounts have homemade lowering plates behind. giving a 2-3 inch lift i think. anyone heard of this??

also for protection, a diff guard and steering guard purchased for less than £100, and angle grinder to front bumperhas given loads of clearance
 
si844 said:
my disco has suspension lift which was on wen i purchased, apparently its a common mod. the rear springs have been put on the front and 110 rear springs fitted to the rear. (i think) front shock turrets cut and rewelded and rear shock mounts have homemade lowering plates behind. giving a 2-3 inch lift i think. anyone heard of this??

also for protection, a diff guard and steering guard purchased for less than £100, and angle grinder to front bumperhas given loads of clearance
Click to expand...

Hmmmm. Rear springs on the front would probably cause it to sag as they're not designed to carry the weight of the engine. 110 rear springs won't fit on a disco unless the whole spring mounting set up is changed to match which would seem to be a bloody long winded way to do it.
 
MundyBoy said:
i'm not looking for a third job, and i not begging at no point do i ask for any money, so please less of the spamming and could you maybe answer the question i asked??
Click to expand...


1. As a LAW student, one would have thought that accurate and effective communication would be an important asset - "and i not begging ",

2. You may say you are not begging, but you do have a Donate button on your website - sure looks like begging to me.

Owning running and modifying Landys costs money, if you haven't got it, you can't do it.

Spamming , what spamming. The bloke is just disagreeing with you, that's what can happen on open forums.
 
hughesy said:
Hmmmm. Rear springs on the front would probably cause it to sag as they're not designed to carry the weight of the engine. 110 rear springs won't fit on a disco unless the whole spring mounting set up is changed to match which would seem to be a bloody long winded way to do it.
Click to expand...


i think thats the way it was done, or was it the other way? ie fronts on rear then the 110 springs on the front i cant remember now. ye a garage checked while back and previous owner had changed spring mounting. they coulnt understand y either
 
You must log in or register to reply here.

Similar threads

R
1999 TD5 Disco Fuel
Replies
1
Views
443
Stanleysteamer
Stanleysteamer
X
Right...
Replies
9
Views
317
pwood999
pwood999
LandySurf
90 TD5 Fob Keys - Can anyone help?
Replies
3
Views
1K
Anaconda
A
S
D4 P006A00 Manifold Absolute pressure - air flow correlation - HELP!!
Replies
12
Views
1K
Stevie135
S
R
93 3.9 EFI full rebuild
Replies
7
Views
2K
rps88
R
Back
Top