hi my name is richard i have just joind this forum as i have a little problem i have a 1998 range rover p38 diesel i have no rev counter and no lights on my dash no fuel gauge checked all my fuese and they are ok can anyone help thanks richard
help
- Thread starter vtrman
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 45,785
- Location
- Near Poitiers SW France
Flat battery, duff alternator or connections.
Datatek
Well-Known Member
- Posts
- 45,785
- Location
- Near Poitiers SW France
To me no lights means no volts. Happy New year to you and yours Fanny.
To me no lights means no volts. Happy New year to you and yours Fanny.
True, seasons greetings
yes it dose start and run when i select hight mode it flashes dull on clocks how to do mi get a copy of this rave manual cheers
- Posts
- 16,482
Manuals
headlights work fine its just the dash and rev counter fuel gauge had this before just changed fuse under drivers seat but that is ok this time altinator is new 14.4volts battery new cheers
- Posts
- 16,482
headlights work fine its just the dash and rev counter fuel gauge had this before just changed fuse under drivers seat but that is ok this time altinator is new 14.4volts battery new cheers
Check the link I gave for the manuals and check the wiring to the Dash binnacle
- Posts
- 16,482
With luck no damage to BeCM...but if the Dash is dim/not functioning and it blows a 10A fuse (hence the 30A) then you have a serious short and needs to be checked ASAP before a nasty end happens...
Try a 10A if that blows....you need to start taking the services that Fuse 1 Feeds apart to find any issues....
Do you have any aftermarket mods like different stereo or in car Bluetooth or such like that could have been badly bodged to fit hence the increased drain and possible short???
Try a 10A if that blows....you need to start taking the services that Fuse 1 Feeds apart to find any issues....
Do you have any aftermarket mods like different stereo or in car Bluetooth or such like that could have been badly bodged to fit hence the increased drain and possible short???
just a radio and a so called mate has tried to wire the fog lights in without going through bcm ?
- Posts
- 16,482
Remove the bodged Fog Lights Wiring and see if you have the same issue....
'Mates' should be let loose on P38 wiring unless they REALLY know what they are doing!
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Do you mean should NOT be let loose ? and this from one that never makes a mistake Ha Ha
- Posts
- 16,482
Do you mean should NOT be let loose ? and this from one that never makes a mistake Ha Ha
Oops .....
removed the wiring to fog lights and still the same the fuel gauge pulses up and down dont know what to do now?
- Posts
- 58,170
- Location
- Preston Lancs.
Remove instrument binnacle (See RAVE) pull plug at right hand side. With ignition on check you have power to pins 4 and 14 from fuse one.
how do i find numbers 4-14 on the plug ive looked on the rave carnt see it cheers
