Help With A Caliper Swap

I put this is the Rangy section with no response, gonna give it a go here.

I have just coil sprung my 80 chassis and have fitted some early rangy axles (late 70,s/early 80's) ish. The front calipers have two fluid feeds.

What I want to do is replace the front calipers with a single feed set but Im not sure if or what model to get these replacement parts from.

Lastly I have not built a servo into the brake system and would like any pointers on what master cylinder to use, currently a clutch pedal assy is fitted but not yet plumbed until some advice is recieved.

Cheers for your help.

Lee
__________________

Hi bodgit
try calipers off 300tdi disco non vented as single feed and should do the job
remote servo should do the trick but not sure ur master cyl wud give enough fluid displacement
hope this helps
gaz

Cheers Gaz,
Will borrow one of the wifes 300tdi to check compatible, I was hoping that the clutch M/C smaller diameter would exert enough pressure to work disc brakes??

Once calipers converted I might just put it on the brake tester to see what im getting on the readings.

Lee