Help pleaseeeeee

Getting info is a bit like pulling teeth without an anaesthetic

No engine doesn't spin as you turn the key it just beeps and says engine immobilised press remote .transfer nuetral gone now as I've put on new battery

Really needs diagnostics IMO to see if the BECM is getting a valid FOB code amoungst other things..

Don't know if this helps but central locking isn't working only drivers door

adamnbecky2010 said:

Don't know if this helps but central locking isn't working only drivers door

Click to expand...

Does the drivers door locking work from the FOB?

Not by the button only by turning the key anticlockwise

adamnbecky2010 said:

Not by the button only by turning the key anticlockwise

Click to expand...

So the FOB is not working or the RF receiver is faulty or disconnected or there is a BECM fault by the sound of it. Still needs P38 specific diagnostics.
If the FOB/RFreceiver etc was working, pressing the button would sort the problem. Have you checked to see if the RF receiver is connected?

Rf receiver is connected and it's the green spot updated version

It was an autel Maxisys that diagnosed my car and the error was anti theft alarm serial link fault error code 94

....and the syncmate you have tried is for the THOR engine?

If it is and you still get no comms....the BeCM could be in an alarmed state....you'll need some decent P38 Diags to sort that

adamnbecky2010 said:

It was an autel Maxisys that diagnosed my car and the error was anti theft alarm serial link fault error code 94

Click to expand...

You need a proper diagnostic reader, not just obd2


giving this a break now, to painful :multiply:

Is there any one on here that will come and do a diagnostic I'm willing tompay the going rate please

adamnbecky2010 said:

Is there any one on here that will come and do a diagnostic I'm willing tompay the going rate please

Click to expand...

Look on rescue map for red circles with spark, click and it will tell you what kit they have

So just looked and nobody anywhere near me with nanocom for my rangie fanbloodytastic

adamnbecky2010 said:

Transfer neutral,widows not set sunroof not set etc key code lockout engine disabled press remote and indicators flashing

Click to expand...

Key code lockout means you have lost sync. First, replace the batteries in your key fob, second, find the manual and read very thoroughly through the instructions for entering the EKA-code. Follow the procedure to the letter and on the final turn of the key your doors should all unlock and indicators flash. If you do this right and there's nothing else wrong with your car, it should fire right up. You can search the forum as well for tips on EKA code entering.

Good luck