demitrious1973
New Member
- Posts
- 563
- Location
- in a mental institute
does anyone know what an air gap is in the brake system
thanks
thanks
help please
- Thread starter demitrious1973
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
disco dude
Active Member
- Posts
- 287
- Location
- Northants
i take it you have abs?
if its abs it is the gap between the sensor and the tone ring from whet i understand its usualy the sensor either got crap on it giveing faules readings or worn wheel bearings.
i have not had this issue yet but i know others that have, my freind found a little ware in the wheel bearing and and that was the cause.
i dont know of any other issues it causes my self but there are others that have posted on this site do a search on abs
i hope this helps
if its abs it is the gap between the sensor and the tone ring from whet i understand its usualy the sensor either got crap on it giveing faules readings or worn wheel bearings.
i have not had this issue yet but i know others that have, my freind found a little ware in the wheel bearing and and that was the cause.
i dont know of any other issues it causes my self but there are others that have posted on this site do a search on abs
i hope this helps
demitrious1973
New Member
- Posts
- 563
- Location
- in a mental institute
hi
funny you should mention wheel bearings i havent long done the front ones, but you are no where near abs when you do bearings or could it be one of the casings isnt in properly?
thanks
funny you should mention wheel bearings i havent long done the front ones, but you are no where near abs when you do bearings or could it be one of the casings isnt in properly?
thanks
disco dude
Active Member
- Posts
- 287
- Location
- Northants
if its the front bearings you changed is it one of the front sensor airgaps that is causeing a problem?
give us the full history of what has happened so we can help
cheers baz
give us the full history of what has happened so we can help
cheers baz
demitrious1973
New Member
- Posts
- 563
- Location
- in a mental institute
abs light stays on and when i brake the abs keeps cutting in and the landy doesnt stop
disco dude
Active Member
- Posts
- 287
- Location
- Northants
ok then im lost im afraid i have never had to do anything on these as yet i asked my mate but he did the rear bearings.
if it didnt come on before you did the bearings it gotta be in the seting up of the new bearings, do you have a haynes book of lies go through what you have done and see if you not set it up right?
have you disloged the cv joint and caused the gap to be to big?
if it didnt come on before you did the bearings it gotta be in the seting up of the new bearings, do you have a haynes book of lies go through what you have done and see if you not set it up right?
have you disloged the cv joint and caused the gap to be to big?
Last edited:
