Help please! Forward facing puma rear seatbelts.

Hi, trying to fit rear forward facing Puma rear seats to a TD5 tub. Managed to do all the hard work with fabrication and fitting. Just need help with where the seatbelt lower anchor point secures. If anyone has a 2007 on genuine CSW could you please post a pic to save me having to go to the main dealer. Thanks

google ftw!!
EIO500060
EIO500070


http://www.ebay.co.uk/itm/Land-Rove...bracket-EIO500070-and-EIO500060-/121150546980

Thx Ste. That looks like the part I would need, but the rear safety devices rollcage sections are mounted where that part goes. I will see what I can fabricate off the rollcage or see if the original brackets can be adapted.

Point taken about Google. I usually do search but thought this was a simple fit to the seat, not another part. Found the image I was after. Not convinced by the angle of the anchor point once mounted, would have thought it wanted to be a 90 degrees to the tub floor. But what do I know LR must have got it right.

Looks like more fabbing is in order.

.

it looks like part 3 has the upper and the reel attached to it, the 3rd point part fitting the plate pictured above

Hi Ste, thanks with all this. I have the upper brackets and reels. You are right with that first part. But looking at the image I later found and posted I will have to adapt either the rollcage parts under the tub or the seatbelt bracket to fit with the rollcage.

have you got a pic of how your cage mount looks?

Hi Ste, not got any actual pics as not with the Landy at the moment. Here is the safety devices diagram though.



It is the rear sections that come up the corner of the tub and under the arch sections. Will try to get some more pics of the actual cage when I get up to the Landy in the next couple of days.