I have just replaced the rear air bags and the compressor on my disco 2 following the very good thread on suspension on this forum. The problem I find myself with is that I can only seen to inflate one air bag or the other I can't get both to inflate at the same time. I have connected the pipes up as per the diagram on the thread ( feed to the centre right return on the right left return on the left ) I have tried all permutations but just can't seem to get the two to inflate at the same time help please!!!!
Help please disco 2 suspension issues
- Thread starter steh1975
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
sierrafery
Well-Known Member
- Posts
- 17,205
- Location
- Arad/Romania
how are you trying to inflate the bags?... with tester or how?..., cos normally the system must inflate them on it's own when you start the engine... i dont understand what you are doing
Nigel1943
Active Member
- Posts
- 350
- Location
- Tamworth Staffs
Some comma's would help!!
You've got the feed to the bags arse about face.
Looking at the compressor end on ie from the front of the car towards the back, the feed to the right bag should be on the extreme left and the left bag on the right, main feed in the middle. Of course, you could also have your pipes mixed up.
Last edited:
