Help Needed.....

I neeed Help done a engine service replaced the oil, oil filter, air filter PCV valve but got stuck when it came to the fuel filter...... have a 51 plate TD4 with the fuel filter and pump in engine bay. problem is getting the fooooker out found the screw, undid the hoses but it's stuck solid anyone near Leeds able to give me a hand locating the pump feed so I'm able to take the whole unit out or have the knack to remove filter as described in the Hayes manual.....I'll get the beers in?
Thanks
Martin

is this any use ? :

https://www.landyzone.co.uk/land-ro...-bonnet-fuel-pump-filter.170336/#post-1710361

~~~~~~~~~~~~~~~~~~~~~~

hd3 said:

is this any use ? :

https://www.landyzone.co.uk/land-ro...-bonnet-fuel-pump-filter.170336/#post-1710361

~~~~~~~~~~~~~~~~~~~~~~

Click to expand...

Hi HD3 thanks for the reply,
I've read that post when I hit problems at first but couldn't see the feed pipe.in mine even took the wheel off to see if I could gain access there...

I got the holder out on my old one but it was getting the pump out of it that was the problem in the end I made a cut down the case and then it came out but I thought there was more than one screw holding it to the body.