help needed please no lights

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

kare

New Member
Posts
10
Location
northampton
a big hello to every one. can anybody help please washed landrover the other week engine bay as well then did,nt drive it for about four days started up first time but noticed that the radio was flashing code .then put the lights on but no lights.. side lights,head main.no hazards now radio asks for code every time i turn it on another thing i noticed aswell that every time i unlock the doors the clock always resets to 1.00.and when i put hazards on they dont work but the radio does all sorts of strange things.
its a tdi200 k plate 1992.
 
Last edited:
You'll have to start looking for bad earth/ground connections around the truck, starting with the main ground cable from the battery to the body/chassis.

Strip connection(s) clean and smear with Vaseline or Komoline jelly on assembly, do not use ordinary grease.

Peter
 
hi peter will give that a try i did check fuses they were ok but did notice but forgot to mention that the light fuses had no live feed when i test them .
 
hi peter will give that a try i did check fuses they were ok but did notice but forgot to mention that the light fuses had no live feed when i test them .

Have a look at the other thread on here with exact same problem. Loads of suggestions. Ended up been a broken wire in the wiring harness.
 
have checked what i think should be fusible there is 4 brown wire all been cut and joined together and connected to 1 cable that goes to the live on batt seems theres been problems before i owned it .
 
:)well guys had a good look around this morning and found that it was a fusible wire that had rotten away all fixed now and everything working as it should.many-thanks to all.
 
Back
Top