hi this is my first post so if it's in the wrong section please move me
I have the usual 3 amigos and have checked all the easy bits wheel sensors and earths etc so today I thought I would take out the shuttle valve and do the wiring mod, now with plenty of googling this all went well and I have re installed everything and connected one of the new leads to a good earth the problem came when I went to connect the other lead which the Internet tells me i need to cut into theyellow/green lead that goes to the plug on the back of the abs unit.
I don't have a y/g lead and the pics on the Internet don't really point to what one it should be any ideas please.
This is on a 2007 90 with a Wabco ecu/ abs module
Thanks
Mark
I have the usual 3 amigos and have checked all the easy bits wheel sensors and earths etc so today I thought I would take out the shuttle valve and do the wiring mod, now with plenty of googling this all went well and I have re installed everything and connected one of the new leads to a good earth the problem came when I went to connect the other lead which the Internet tells me i need to cut into theyellow/green lead that goes to the plug on the back of the abs unit.
I don't have a y/g lead and the pics on the Internet don't really point to what one it should be any ideas please.
This is on a 2007 90 with a Wabco ecu/ abs module
Thanks
Mark
