Help Need Clutch and Knocking sound

Stewy85 · Apr 29, 2009

Hi,the mssus drives the freelander all the time she has been complaining of the car driving slow!!!

I drove the car today and whilst pulling out of my car park space steering on full lock there was a knocking and squeeking noise that sounded like it was coming from the front of the car WHAT IS IT??

Also i was driving along and put my foot to the floor (in gear) and the engine just reved so i am thinking this is the clutch am i correct??

And should i be driving the car?

Can you please help me on this and give me some sort of price to buy and get fitted?

Thanks stewy

TD5 is Alive · Apr 29, 2009

the knock/squeak from the front could be a anti roll link, try rocking the motor whilst stood still or a manual check of the joints.
the other favourite is the c.v joint.
if the engine reved up but didnt increase the speed of the vechicle i would agree with clutch, if how ever it is moving more like a old 2.25 diesel then i would say turbo hose.

Chaser · Apr 29, 2009

Driving with a slipping clutch will ultimately wear/score the flywheel leading to a more expensive repair. It could also burn out altogether resulting in a breakdown recovery so probably best not to drive it until you can get a new clutch fitted.

TD5 is Alive · Apr 29, 2009

and the td4 used a dual mass fly wheel so big bucks!!
if you do get the clutch changed make sure they change the slave/bearing at the same time.

Stewy85 · May 6, 2009

Stewy85 said:
Hi,the mssus drives the freelander all the time she has been complaining of the car driving slow!!!

I drove the car today and whilst pulling out of my car park space steering on full lock there was a knocking and squeeking noise that sounded like it was coming from the front of the car WHAT IS IT??

Also i was driving along and put my foot to the floor (in gear) and the engine just reved so i am thinking this is the clutch am i correct??

And should i be driving the car?

Can you please help me on this and give me some sort of price to buy and get fitted?

Thanks stewy

Just got my landy back from the menders i nearley had a heart attack, are you ready for the list of things that were wrong with it....

- Flywheel £436.95
- clutch kit £150.43
- Slave Cylinder £98.95
- Transfer Box £757.73
- Viscous Coupling £382.38
- Support Bearings £109.25
- Gear Oil £22.50
- Labour £300.00

Total Cost £2,258.19:doh:

I am now skint but at least its back on the road.........

Kernow nige · May 7, 2009

Stewy85 said:
Just got my landy back from the menders i nearley had a heart attack, are you ready for the list of things that were wrong with it....

- Flywheel £436.95
- clutch kit £150.43
- Slave Cylinder £98.95
- Transfer Box £757.73
- Viscous Coupling £382.38
- Support Bearings £109.25
- Gear Oil £22.50
- Labour £300.00

Total Cost £2,258.19:doh:

I am now skint but at least its back on the road.........

................

edge · May 7, 2009

Ouch!!!!

Help Need Clutch and Knocking sound

Stewy85

New Member

TD5 is Alive

New Member

Chaser

New Member

TD5 is Alive

New Member

Stewy85

New Member

Kernow nige

New Member

edge

Active Member

Similar threads