Help . Gears select, but wont engage,

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
How difficult is it to get the cable along the pipes? I might change mine as I don't think its ever been done you see.
 
discomania said:
How difficult is it to get the cable along the pipes? I might change mine as I don't think its ever been done you see.
Click to expand...

It's not difficult feeding the cable through. You might have a problem finding somewhere to attatch the cable though. You should just be able to get a pneumatic drill in over the bell housing to make a small incision to locate the arm.:D:D:D
 
Was there any bang when you lost the gears? Is it possible you have torn the clutch up? As mentioned when trying to engage lo/hi gears somtimes you need to lift the clutch pedal enough to allow the cogs to rotate slightly and line up, if the clutch has gone then nothing will be rotating in the gear/transfer boxes.

The whirring sound could just be the thrust bearing.

Just a thought,

regards

Dave
 
Last edited:
You must log in or register to reply here.

Similar threads

B
Disco2 TD5 Can only select one gear
Replies
8
Views
863
Bugz
B
N
Noise from gearbox/transfer box
Replies
14
Views
2K
NeilsWheels
N
G
Freelander 2 sd4 xs (2012) gears slipping automatic
Replies
12
Views
908
Nodge68
Nodge68
B
TD5 R380 gearbox selector bush
Replies
1
Views
485
Landmark2
Landmark2
N
Discovery auto gerabox issues
Replies
19
Views
989
marjon
marjon
Back
Top