HELP !! 4.0 head gasket blown

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
F

FEZ3749

New Member
Posts
10
Location
Haworth, West Yorkshire
I have just bought my first Land Rover (P38 4.0SE) only to have the head gasket blow on me in the first week of ownership,looks like i got stiched up as i was told the gasket have just been done and all should be fine (peace of mind sort of thing) yeah right!!

Not dettered though i would like to get it back on the road and was wondering if anyone could point me in the direction of an idiots guide to head removal as i would like to have a go at fixing this myself as the cost at the local garage is just to prohibitive, i can usualy turn my had to most things with some guidance. I am off to pick up a gasket/bolt set today and would appreciate any tips/tricks/advice be it useful, funny or otherwise.

Looking forward to hearing from you, thanks Vic
 
Last edited:
hi vic welcome, there are some bad bastids out there selling ****. i got 3 weeks out of mine, its not as big a job as you may think, just take your time, if you find when you get heads off the gasket is not blown, dont wast any money and time putting it back together. you will need a engine.[hope this is not the case] good luck..
 
Hi
Thanks for the reply, i am hoping it is the gasket as it does seem to be running on 7 cylinders and i can feel air blowing out of the drivers side of the engine, but i guess that could be the manifold gasket ???
 
it could be he did it on the cheep,never got heads skimmed, if you need any help post in the range rover page, you get all the help you need..j
 
Or the liners have slipped and no ammount of head gaskets will fix it , check the liners are still at the top of the bore when you have the heads off!
 
Slow , boring and noisy- in the wrong way!

Beast you will have to expand you vocab to more than "burn in" or "fit/buy a diesel" lol :p
 
You must log in or register to reply here.

Similar threads

Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
759
Padda.116
Padda.116
A
P38A Head Gasket Kit & ARP Bolts ?
2
Replies
23
Views
1K
enjoi
enjoi
G
TD5 Head Gasket?
2
Replies
24
Views
3K
Stanleysteamer
Stanleysteamer
Lephreek
Possible blown head gasket. What next?
2
Replies
25
Views
1K
Lephreek
Lephreek
D
P38 4.6l gems blown head gasket
Replies
19
Views
2K
pwood999
pwood999
Back
Top