Heating diffusion problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Nico2121 said:
It seems to me that I have this problem.

https://www.rangerovers.net/threads/no-heat-on-left-side-temp-blend-motor-and-flap-work.73377/

On the other hand, a charitable soul could summarize the problem for me, because passing each time with a translation is quite complicated.

There is something that is clogging but I can not understand what ....

All the cases thanks to you.
Click to expand...

hi

Think things are getting lost in translation , have a read of my previous posts and pictures

there are other things that can cause this that’s why it’s so important to get the codes

Plse keep us updated
 
Last edited:
Hello

I just had my icarsoft 930, and I come back to you with the error codes.
The ventilation servomotor must be the cause.


Code B1b74 B1b75
Defrost ventilation mode servomotor, front floor

Code B1b76
Servomotor of the mixing valve left

Code B1b77
Servomotor of the mixing valve right


Code U3000
control module

What do you think ?

Thank you
 
Nico2121 said:
Hello

I just had my icarsoft 930, and I come back to you with the error codes.
The ventilation servomotor must be the cause.


Code B1b74 B1b75
Defrost ventilation mode servomotor, front floor

Code B1b76
Servomotor of the mixing valve left

Code B1b77
Servomotor of the mixing valve right


Code U3000
control module

What do you think ?

Thank you
Click to expand...
Clear the faults and see what comes back, some may be historical.
 
ok

So I have to remove all the dashboard and the glove box like him?



And after I look if it's the connectors that do not work anymore ?



That's what I circled in red, the connectors?

IJtq7CKLsxT_s-l1600.jpg
 
Last edited:
Hi

just quickly and don’t know if you have, but u should be able to use ur diagnostic to operate each and every motor

seems weird 3 x are faulty , just trying to think where the ecu is as maybe there’s a bad connection, bent pin inside the connector that fits onto the ecu

just a thought to check before going any further
 
Hi, thank you for your reply.


It's true that it's weird because I have hot air on the right while he tells me that there is also a problem on the right. Code B1b77
Servomotor of the mixing valve right

No I can not operate each servomotor with the device, either I do not know very well use it or we can not do it.

I think about this second hypothesis because I really have to watch everything.

But if it's a problem of connection or pin, I have no choice to disassemble everything.
 
Nico2121 said:
Hi, thank you for your reply.


It's true that it's weird because I have hot air on the right while he tells me that there is also a problem on the right. Code B1b77
Servomotor of the mixing valve right

No I can not operate each servomotor with the device, either I do not know very well use it or we can not do it.

I think about this second hypothesis because I really have to watch everything.

But if it's a problem of connection or pin, I have no choice to disassemble everything.
Click to expand...

ive managed after some digging to find the connectors and what each pin is connected to

so at least then ur be able to see if power is coming out of the ecu towards the motors

also I’ll do some more digging ref the fault codes for u

52AA4DD0-C555-4B86-A266-8C816E1D3C37.jpeg
23F609D0-1C08-4227-B204-D5F149D58515.jpeg
0CE4F6AF-BF3E-428D-A345-61C1C3351E8D.jpeg
AC06DD28-42D3-48B6-8AB5-386B614DB34B.png
 
You must log in or register to reply here.

Similar threads

R
Range Rover Supercharged Oxygen sensor 3 problem
Replies
14
Views
745
biketeacherdave
biketeacherdave
D
mysterious defect in the heating system
Replies
10
Views
994
Dippypud
Dippypud
Pablo63
Help please Parking aid issues.
Replies
14
Views
565
JokerUK
JokerUK
Montyjohn
P38A Is there a long term fix for the delicate HVAC blender motors?
Replies
10
Views
714
pwood999
pwood999
feyniriel
P38 key not locking the car
Replies
10
Views
391
Rubberknees
Rubberknees
Back
Top