Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
So, having become completely fed up with the pizz poor heater on Compo, I thought I'd have a go at the bilge blower idea. Just to test the effectiveness of the 3 inch bilge blower, I disconnected the flexible pipe from the original heater fan and connected it to the bilge blower and wired it it to the battery. What a disappointment, hardly any difference in the amount of air coming through the vents. If the original produced an air flow compared to a knats fart, the bilge blower produced a fart of an house fly. Before you ask, I did have the pipe on the right end. There was a very slight improvement in the amount of air coming through the passenger vent but no difference on the driver side. I've read on here that this is supposed to make a really good improvement so where do you think my problem is? I'm just glad I didn't go to the effort of fitting the new blower in properly before the test.
Col
Col