Heater panel llighting burned out

In my 300Tdi, you just pop off the three dials (may need a knife to lever them, then same for the fan speed control. There will then be two screws exposed, once they are removed the black front panel can just be removed by hand. There is only one bulb for this area, it is in the middle of the unit. Be careful removing it. Mine was stiff and I reckon I butchered it a bit when taking it out, so have had difficulty fitting a new bulb.

Must have another look at it over the w/end

davej, thanks alot I will have a go at it today. thank god for the zone. jim

Dunno if this is PC but there are pix on Difflock...