- Posts
- 7,332
- Location
- Under my landy
Are the pipes to the heater matrix on a 2a (though assume same for all) 1/2" or 5/8" pipes?
Heater Matrix pipes - 1/2" or 5/8" ???
- Thread starter Bump
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
think at the heater end they are 1/2" and the engine end is 9/16 but if you tighten it up enough on the engine end you will get a 5/8 hose on it but i think for a s111 both ends of the hoses are the same 9/16 but i could be wrong.
graham
_____________________
98 d1 300tdi g.s. auto.
graham
_____________________
98 d1 300tdi g.s. auto.
- Posts
- 7,332
- Location
- Under my landy
16mm = 5/8th.
I have a second heater matrix to go into the cab which is 1/2" so i guess i need a 5/8" --> 1/2" T piece then to plumb it all in.
Thanks.
I have a second heater matrix to go into the cab which is 1/2" so i guess i need a 5/8" --> 1/2" T piece then to plumb it all in.
Thanks.
