P38A Heater ducting part number

Hi all,

I've got the whole dash out today to do blend motors, heater matrix o-rings and capless bulbs.

Looks like a rabid animal has gone wild at all the fixings and ducting under the dash which would go some way to explaining why I'm not getting any air out of the vents. The RH heater duct that takes air to the centre console and furthest RH vent has been completely butched and then just taped shut. I can't find this part for sale anywhere annoyingly. Does anyone have a lead on one or the part number? The left side one is AWR 2719.

More generally, where can I find all the P38 part numbers (not in rave?). Is there a site like realoem BMW for Land Rover?

I'm going to put a new throttle cable in too. Any other jobs I should do whilst the dash is out?

Tom

Sounds like someone has been in there before to do the heater you could tape them back up or replace and cut them about next time you have to get in there
try microcat for part numbers.

brianp38dse said:

Sounds like someone has been in there before to do the heater you could tape them back up or replace and cut them about next time you have to get in there
try microcat for part numbers.

Click to expand...

Thanks, found it on microcat, ordered the only one on ebay for £10.

Whomever did the work before me didn't bother to put the ducting back, so the air was just blowing into the dash. I'm now wondering if the blend motors were even faulty but going to replace them anyway as it's all exposed.

brianp38dse said:

Sounds like someone has been in there before to do the heater you could tape them back up or replace and cut them about next time you have to get in there
try microcat for part numbers.

Click to expand...

Thanks, found it on microcat, ordered the only one on ebay for £10.

Whomever did the work before me didn't bother to put the ducting back, so the air was just blowing into the dash. I'm now wondering if the blend motors were even faulty but going to replace them anyway as it's all exposed.