heater box referb

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
oggy said:
This has got me thinking:confused: Which way would you stick them together ? core to core or side by side ?
All they are is a small 2row radiator core with a baffles in .
would a copper core twice the size of the heater with brass tanks soldered on be much better do you think?;)
Click to expand...


wire tie them together flat to flat core , then plumb up in series,
ie of the 4 pipes connect the outer two to the flow and return of the heater pipes from the head and the inner two pipes together ;),
 
yes could be done that way or better still a 4 row core as thick as the 2 heaters put together then just the 2 pipes as in your pic. And i know just the place to get the proper pipes from:D
mmm thinks im going to have a play with this idea;)
 
it will only get as hot as the extistin one but with more area shirly? so it flows faster, keeps the heat in , but if the coolants running at say 85, then the heater will chuck the same , ??
 
90truckcab said:
it will only get as hot as the extistin one but with more area shirly? so it flows faster, keeps the heat in , but if the coolants running at say 85, then the heater will chuck the same , ??
Click to expand...

nah you'll get more volume of hot air from it - same as a bigger house rad - but if the boiler isn't man enough it'll be no improvement - also make sure the fan motor is up to speed to push that extra heat out to the cabin

another issue is that a overly effective cabin heater will start to over cool the coolant, and therefore the engine

did you get your water pump issue sorted ?
 
Sean said:
where this fancy matrix i hear you speak of coming from ?
Click to expand...
Nothing fancy. It was just an idea after reading this thread thats all. end of the day they are built the same as a rad core but with narrower tubes.
I was just going to have a play & see what i come up with.
 
Sean said:
did you get your water pump issue sorted ?
Click to expand...


:rolleyes: yeah, pump was fine, was the viscus fan, stuck, was over coolin, so its off now till the summer, dont seem to be going over half , will tow the ifor for a good run tomorrow see if it does anythin drastic :eek: should be ok
 
90truckcab said:
:rolleyes: yeah, pump was fine, was the viscus fan, stuck, was over coolin, so its off now till the summer, dont seem to be going over half , will tow the ifor for a good run tomorrow see if it does anythin drastic :eek: should be ok
Click to expand...

shows how well the fan can cool when it spinning

tis nice when it's something so simple
 
You must log in or register to reply here.

Similar threads

W
24v heater internal flap foam replacement.
Replies
6
Views
371
dag019
dag019
El-Ekim
Double banjo in fuel filter for diesel heater ?
Replies
9
Views
652
landowner
landowner
O
Heater options
2
Replies
34
Views
3K
FlyingPete
FlyingPete
W
Heater cab duct flap trunnion.
Replies
5
Views
371
tottot
tottot
styleruk
Heater blower
Replies
15
Views
2K
styleruk
styleruk
Back
Top