Heater air duct valves

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
W

Webley1991

Well-Known Member
Posts
2,579
Location
London
I found out yesterday that the cable that connects to the heater control on my Series 3 is broken at the control end.

This is the cable that connects the Cab / Demister selector switch to the gate valve.

Is there any simple way to get at the valve without having to remove the instrument panel etc.?

Thanks for any info.
 
the levers and cable are under the endplate/cover of the dashboard (drivers end), from memory 4 screws and it's off with the cables/levers exposed

no idea where to get at the vent flaps
 
If it's the wire to the valve on the engine you can pull the inner wire out and feed the new one through the outer.
If it's the directional flaps you will have to strip the lower dash facia off.
 
To resurrect an old thread. Can anyone provide a part number and correct name, for the cable connecting the lower dashboard vent flaps to the control?
 
You must log in or register to reply here.

Similar threads

S
heater control cabel routing
Replies
4
Views
949
codfather79
codfather79
NowayPedro
Series 3 Screen washer
Replies
3
Views
259
Dippypud
Dippypud
L
SNEAKY V8 COOLANT LEAK SOURCE!!
Replies
0
Views
465
lrjohn
L
Forgotthelandinggear
Gearbox “sloppy” neutral
Replies
5
Views
1K
Forgotthelandinggear
Forgotthelandinggear
L
Sunroof drain hoses, where it finishes?
Replies
0
Views
220
Lauroland
L
Back
Top