Headlight Levelling Screws - Puma

Hi all,

I would like to swap the headlights in my 2011 90, so I’m compiling a list of bits I need. Bezel, fitting screws etc.

My vehicle has the levelling switch inside the cab. And it seems to only have an adjustment screw at the bottom of both lenses. Not at the top. Is that correct, or are they just missing? Meaning I also need to purchase the fixing kit.
Is the process of removing/replacing them the same on a Puma as a TD5?

Thanks

Owen

two trimmer screws per headlamp. One at the bottom and one at the side per lamp. I changed my bezels for stainless (Bearmach I think), the original chromed items disintegrated at 6 years old. I also replaced the rubber + circlip parts on the trimmer screws with nyloc stainless nuts (rounded ends against the bezels) and they are much better for the job. And refitted with copper grease for reliability.
edit - just looked back at my notes, bezel part numbers stc 3018ss, Bearmach.

Thanks very much @Wimblowdriver
The bezel still has the notch at the top for a screw, but doesn’t use one. Phew!