head gasket change was successfull after all.....just the muppets before wasnt.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
squiz34 said:
ok heres the latest part..............head/gasket changed,new plugs,new leads,new stat(before 1st attempt),

everything was flushed to check flows...all good......

its back together and running quite well but.......top rad hose is red hot,bottome one is cold....coolant in tank is not bubbleing up or boiling......


the bottom pipe is cold but so is top part of rad......untill i undo top bleed valve then bottom hose is warm is it should be.....

can some one maybe tell me at which point i should try get air out?...im thinking remove small hose from top of rad after a good run? hot air rises etc...or am i clutching at straws?

thanks
Click to expand...


bottom hose wont get hot unless your engine overheats its winter so normal. whats your temp gauge telling you ??????
 
You must log in or register to reply here.
Back
Top