Landysteve9607
Member
- Posts
- 17
- Location
- Essex
Evening all
Does anyone on here know how to remove the sliding window at the rear of my 110 HCPU ??
Does anyone on here know how to remove the sliding window at the rear of my 110 HCPU ??
HCPU Rear Sliding Window
- Thread starter Landysteve9607
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bankz5152
Well-Known Member
- Posts
- 9,175
- Location
- South London/North Kent
If you want to remove the entire frame its as simple as drilling out the pop rivets and pushing it out. Takes minutes.
Landysteve9607
Member
- Posts
- 17
- Location
- Essex
Thanks, that will be the way too go then I need to replace the rubbers because the window rattles all the time and need to tint them as well.
bankz5152
Well-Known Member
- Posts
- 9,175
- Location
- South London/North Kent
I took my out and replaced with a one piece window from VGS. No rattles and its heated!
Once the frame is out you can split it to replace the seals and tint etc...
Once the frame is out you can split it to replace the seals and tint etc...
Landysteve9607
Member
- Posts
- 17
- Location
- Essex
That looks well cool and heated too.I prefer to keep mine ,but tinted it gives good ventilation as I dont have a/c and I have an ifor that fits the back.
Thanks for the quick reply.
bankz5152
Well-Known Member
- Posts
- 9,175
- Location
- South London/North Kent
Thanks 
Yeah the rear passengers miss the sliding window
Have a look on VGS website anywya as I think they do some.anti rattle/upgraded seals and bits
Yeah the rear passengers miss the sliding window Have a look on VGS website anywya as I think they do some.anti rattle/upgraded seals and bits
Landysteve9607
Member
- Posts
- 17
- Location
- Essex
Will do,very handy to know.Thanks
Have a look on VGS website anywya as I think they do some.anti rattle/upgraded seals and bits
Thanks again.
