Hazards

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

kricktd5

Member
Posts
22
Location
uk
Hi all,
so I have a 1999 discovery 2 TD5 I've owned for the last year now and have loved every min until last Sunday when me and the Mrs went out and the land rover opened fine started it up and the hazards started to flash I turned it off locked it unlocked it and tried again but still the same result.
so been checking on here for the answer. but draw a blank.
I have put a new inertia switch.
I've changed the hazard light switch.
I've had all fuse boxes out and checked them for damp or any signs of corrosion but all are fine.
so I've had to pull the fuse for the time being.
so the land rover starts up unlocks fine and locks back up fine.
this morning when I got in and turned the key the locks did a cycle like I locked the car and opened it.
the central locking works fine from the key.
I've disconnect the battery for a couple of hours.
locked the car and unlocked 3 times from the door top set the alarm off.
but i am now at a loss of where to go next.
any help would be much appreciated.
I've worked on cars for 16 years and I am now at a complete loss.
I am also a M.O.T tester so have use of a garage and a lift
 
Back
Top