Haynes alternative?
- Thread starter Orm
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,230
- Location
- Embasinga stocæ
wot V8 is it - have yu got Rave?
Beast o Bodmin
Banned
- Posts
- 17,157
i have original workshop up to 1985 i could copy page you want..
Beast o Bodmin
Banned
- Posts
- 17,157
Teflon
New Member
- Posts
- 683
The factory Rave discs are all available on line, if you search the forums, pwople have put up links to them.
For a Hard-Copy of something to stick in the car, the Factory 'Repair Over-Haul Manuals' are just about as definative and comp[rehensive as you can get; each model has its own ROM, priced around £20 from Paddocs or Craddocks and most good parts emptoiums; and there is one specifically for the Rover V8 engine, which is pretty darn good.
Again, there are pdf versions of a lot of these 'out there' on the web, yo down-load.... but tricky to carry in the car.
For a Hard-Copy of something to stick in the car, the Factory 'Repair Over-Haul Manuals' are just about as definative and comp[rehensive as you can get; each model has its own ROM, priced around £20 from Paddocs or Craddocks and most good parts emptoiums; and there is one specifically for the Rover V8 engine, which is pretty darn good.
Again, there are pdf versions of a lot of these 'out there' on the web, yo down-load.... but tricky to carry in the car.
Cheers Teflon... I've found the PDFs - cheers.
I've also stumped up for the Haynes jobbie.
Similar threads
Freelander 2 (LR2)
Clutch bleed nipple