Have I been driving 2wd for too long????

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Spacemonkey... said:
I 'think' it was a long 32mm I used too? Either way, the new bearing went on very easy, just be sure to get the cups the right way around- see Hippo's guide, it's quite good. Dunno if right or wrong, but I lubed the rubbers with teflon spray before fitting the cups so they spun easier against the cups until they sorted themselves out.



Quote:
Originally Posted by Spacemonkey...
I used to work there. Nasty place...

...and Basingstoke, and Swindon, and Croydon, and Penge, and Highbury. Lovely places...



Haha! I moved from Penge to Whitehorse Road and it was an improvement I guess, but... ;)
Click to expand...

I'm in the South of the borough....
 
may have missed something but have you sorted the vibration out yet ,it should not be the tyres as they were ok before you put the prop back on, why was it taken off?. also have you checked the diff now that it is being used
 
teddywood1 said:
may have missed something but have you sorted the vibration out yet ,it should not be the tyres as they were ok before you put the prop back on, why was it taken off?. also have you checked the diff now that it is being used
Click to expand...

They took the prop off to replace the VCU and bearings for the 2nd time:rolleyes:

Think I will check Diff mounts too after speaking to Ken at Bell.

Cant remember having this drone and vibration with the original VCU tho which was also providing 4wd.:confused:
 
You must log in or register to reply here.

Similar threads

B
vibration under load.
Replies
1
Views
281
andyfreelandy
andyfreelandy
xDParis64
IRD Fail???
2
Replies
22
Views
1K
xDParis64
xDParis64
Gun7354
Vibrations
Replies
7
Views
805
Gun7354
Gun7354
H
Finding source for vibration/lump at idle
Replies
2
Views
805
HACKCHILD
H
MaxTheDog1
Freelander 1 Another VCU Fred.
Replies
14
Views
2K
The Pilgrim
T
Back
Top