1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

Has TD5 ECU pairing with AS10?

Discussion in 'TD5' started by Mario110, May 18, 2021.

< Previous Thread | Next Thread >
  1. Mario110

    Mario110 Member

    Joined:
    Nov 12, 2018
    Posts:
    89
    Likes Received:
    2
    Location:
    Germany
    Hi all,
    I got a spare ECU today I want to test in my TD5. Is it safe to test the new used ECU just by swapping or do I have any issues because AS10 is blocking then? Or in other words, do I have to pair the new ECU with AS10 and to pair again my old ECU after test with AS10?
    Thanks & Best Mario
     
  2. tom1979

    tom1979 Well-Known Member

    Joined:
    Aug 22, 2013
    Posts:
    1,884
    Likes Received:
    343
    Location:
    Bedford, UK
    You will need to pair it, then pair it again once the old one is back in.
     
  3. Mario110

    Mario110 Member

    Joined:
    Nov 12, 2018
    Posts:
    89
    Likes Received:
    2
    Location:
    Germany
    Thanks for reply. Ok, I have a Nanocom and I found the respective part in the manual. So, procedure is:
    1. Connect the new ECU
    2. Turn on ignition
    3. In Nanocom start "Learn Security Code" procedure, following instructions....
    4. Write Injector Codes
    5. Have fun?
    Right?
     
  4. Mario110

    Mario110 Member

    Joined:
    Nov 12, 2018
    Posts:
    89
    Likes Received:
    2
    Location:
    Germany
    Ok, I tried the sequence above...everything works fine :) It's really easy.
    @tom1979 Thx
     
< Previous Thread | Next Thread >