Hardtop seals 334610 (RHS)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
mick 1986

mick 1986

Well-Known Member
Posts
2,537
Location
Lost
When fitting the roof today, I tried to fit seal 334610 (RHS) hardtop to roof seal.

The old seal was triangular, and supple. These new ones were hard, and square. The slot is triangular too, so these ones don’t fit!

Has anyone else had any issues with these seals? I have thrown the towel in for today, but measured up to make my own seals tonight. I will be using 2 layers of 3mm neoprene and calling that good.
 
Al2O3 said:
Where did you buy the seal from?
Click to expand...

I got them form LR direct, but they are britpart. I’m not sure that type of seal is designed for my type of window/side panel. I don’t know of different ones, but maybe mine are different to the type that seal was designed for. Anyway, I will use the home made version tomorrow and see how I get on.
 
Does your original look like this?
LR053838.jpg
 
mick the builder said:
I had the same problem so ended up using the old ones again.
Click to expand...

Al2O3 said:
Odd,
I'd be tempted to wait and sort out proper seals. Or, do what Mick did and use the old ones if you're in a hurry.
Click to expand...

I would use the old ones, but I think I binned them as they were worse for wear. They didn’t seal properly anyway, so I don’t feel like I have lost anything by making my own. If it doesn’t work, I can always apply some sealer to the seam.
 
You must log in or register to reply here.

Similar threads

dag019
Difference between hard top and station wagon roof
Replies
9
Views
641
julianf
julianf
G
Half shaft seals failing repeatedly Discovery 2
2
Replies
20
Views
2K
Gingerbread
G
A
D2 front driveshaft seal
2
Replies
24
Views
2K
Kev12
Kev12
G
D1 door seals
Replies
4
Views
721
guzzi lemans
G
border
Door Seals
Replies
7
Views
2K
dag019
dag019
Back
Top