hard dash removal (heater matrix change)
- Thread starter jeff
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
rangie1998
Active Member
- Posts
- 279
- Location
- Leeds
Its actually not too bad, I had to change my heater matrix earlier this year (wanted to do it before winter!!). Took me about 3 hours to do the job. Most of the screws holding the dash in are easy to access, some are hidden by the heater fents and under the tray at the top of the dash on the passenger side.
wil2813
Well-Known Member
- Posts
- 2,324
+1
mikieman
Well-Known Member
- Posts
- 332
- Location
- United States
its not bad at all but can be time consumeing...i thought the hardest part was reconnecting the hoses behind the motor...just remember where to plug in everything...
and takeing the heater assembly apart can be a challenge ///i replaced my heater core...with a little creativeness....good luck...its worth the effort...
and takeing the heater assembly apart can be a challenge ///i replaced my heater core...with a little creativeness....good luck...its worth the effort...
