Happenings since air spring change.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

stevebrookman

Well-Known Member
Posts
390
Thanks for all the advice on changing the air springs.

Since changing the air springs I now find that occasionally the access height light flashes whilst standard height light is on for longer than before-sometimes it takes 20-30 secs for the standard height ride to be reached. This only happens now and again-mostly standard height light straight on -suspension has no leaks-not down on one side or anything like that.
Suspension will go to high mode straight away if asked.

Before the bags were changed it could take up to 10 secs for standard height to be reached if it needed.

Any issues-or suspension just settling down?

I'm off towing for a fortnight so will give it a good bash.

Thanks

Steve
 
If you can be bothered hunting you'll probably find a tiny leak, possibly where a pipe goes into a bag. As I said, if you can be bothered.

From your previous posts I take it that you've changed the bags because of old age. Well don't forget that your compressor is probably the same age. You might want to think of refurbing it next. Or at least buy yourself a kit and have it ready if you notice that the suspension starts taking a bit longer to settle. If you can change the bags then refurbing the pump should be nothing - to a man of your recently acquired expertise - and as you've discovered there's all the help you could want on here.

Well done mate and welcome to the other fun part of running a Rangie, keeping it running.
 
Back
Top