Grab handle

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Nope. I'd have gone ahead if it had. I was hoping the threaded inserts would be there under the headlining; if they are I'll pull it to see the placement.
 
The actual roof will be the same between LHD and RHD. So the handle from the passenger side of a LHD will fit the RHD drivers side. Actually I suspect that the left and right handles are the same.
There was an option for a sunglasses holder above the drivers door. So I'm guessing the the fixings are already there. You simply need to find a grab handle, locate the fixing point and screw it into place.
 
The actual roof will be the same between LHD and RHD. So the handle from the passenger side of a LHD will fit the RHD drivers side. Actually I suspect that the left and right handles are the same.
There was an option for a sunglasses holder above the drivers door. So I'm guessing the the fixings are already there. You simply need to find a grab handle, locate the fixing point and screw it into place.

Any ideas how to locate the holes without taking off the door sealer and pulling the liner away John?? If I had rough measurements I would stick a pin in to feel for the mounts.:)

I cannot believe there is no grab handle on anywhere in the front.:eek::eek:

I like one on the pillar (A pillar innit) and one on the roof and same for the passenger.
I am gonna search eBay now then.;)
 
has the roof lining above your door got 2 plastic pieces in it if so that is where a grab handle will fit
I have pulled the roof liner and there isn't even an insert for a grab handle so to fit one means drilling and using a couple of screws.:(
 
Back
Top