getting a 110 on a lorry?????help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
yella said:
if the hiab is plated at 3.6t that means it will lift 3.6 tonnes at 1 metre. ie; when all the booms are in and with the dipper arm angled down to 1 metre from the main boom. it will only dio this on the main ram.get a close as you can to the vehicle with the lorry and remember to take your time and be steady.
Click to expand...
gonna park right next to it and lift is straight onto back the drives been on this wagon fer years says he wont have a problem only 1.8 ish tonnes
weve got a bigger wagon lith a mal:confused: rather than a hiab seems like a kinder sit on hiab thing and can lift more would i be better using this
 
Used tae drive a 3.5 ton dumper ontae the back of a dropside lorry a few years ago, that was ferkin' scary!!!
It did have ramps that were made tae fit and hook on the back tho;) :D
 
then he has to slide it on a trailer with no wheels on the car. even my wagon has a chequer bed and its fooked it draggin **** on all the time.
 
dunt know it dint say it is I just assumed it was a flatbed and he was gonna lift on and off. even if it tips he'd have to slide it down some ramps or summat and without wheels it'd be a bugger to do it safely.
 
You must log in or register to reply here.

Similar threads

T
Pressure Build Up on Hoses and Overheating 2.5na 110. Help
Replies
2
Views
245
the-prince-e-paul
T
nevillen
They Don't Make 'Em Like This Anymore! 2004 3.0 Tdi
Replies
11
Views
986
nevillen
nevillen
P
Advice needed for fixing a VM 2.5
Replies
9
Views
1K
lynall
L
A
L322 Air Suspension Diagnostic Help
Replies
11
Views
2K
Mark Piercy
Mark Piercy
S
Disco 4 (LR4) Can anyone help[ me. I have a 2011 discovery 4 which was going fine untill a year ago then I got an orange trriangle on dashboard telling me there was
Replies
9
Views
646
stuzygriff
S
Back
Top