Generator Qeustion

border said:

Sorry to be a Pain but would this one do the job,https://www.sgs-engineering.com/air-compressors/semi-pro-diy/sc6h-6-litre-oil-less-air-compressor Cheap and Cheerful, Like I say its only for painting axles and chassis, parts does not need to be a show room finish just a decent smooth one.

Click to expand...

Al2O3 said:

Have you investigated paints?

Click to expand...

border said:

Ordered a Litre of this to try,https://www.arc-rite.co.uk/corroless-rf16-glass-leaf-impregnated-gloss-top-coat-any-colour seen it on one of the L R Videos similar to Buzweld although some say its the very same only a different tin,
The video is on there to see.

Click to expand...

Al2O3 said:

Any H&S info on it re spraying? I know 2k is REALLY bad, don't know about 1k

Click to expand...

border said:

They do an excellent job on spraying on the vids but then again, Looks like I will be brushing it on, should get it tomorrow,, which brings me to my other job of getting a really good set of brushes.
Forgot to mention the Video sight gives you a code to get 10 percent off all paints from Arc Rite it is . LRTV100

Click to expand...

Al2O3 said:

As well as being ugly, that guy drones on a bit!
Yeah, the LRTV fella is using a proper paint droplet air filter. Other paints need forced air masks. Worth reading up about otherwise your lungs failing will make the hernia op seem very insignificant

Click to expand...

border said:

If it comes tomorrow Ill be itching to try it so probably end up Brushing it on, will make sure both doors are open for plenty ventilation probably just do one coat and let it dry completely between coats.

Click to expand...