gearbox or clutch

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

charts0

New Member
Posts
27
hi all got a promblem with my 90 cant get reverse but can get all forward gears.yet can drive say up to 30mph drop in to first gear let foot off clutch and she just keeps cruiseing along with no resistance . if any one as any ideas it would be much appreciated cheers chris .oh its a r380 box cheers chris :confused:
 
seems a peculiar one rev can fail and leave you with all other gears but no engine breaking is wouldnt seem a box fault , the last one i had it turned out to be overdrive unit any more info ,have you jacked each wheel up in turn and in gear and felt for excessive play
 
seems a peculiar one rev can fail and leave you with all other gears but no engine breaking is wouldnt seem a box fault , the last one i had it turned out to be overdrive unit any more info ,have you jacked each wheel up in turn and in gear and felt for excessive play
will try that cheers as got overdrive on it thanks
 
one of the reasons over drive has a control unit is so it cant be engaged whilst car is in reverse as this damages over drive
 
yes but you need pto cover ,bearing plate and input gear with bearings (frc5564 x 2)if youve got original parts it would be easier ,as input gear needs shimming to get preload correct units can be repaired ,devon 4x4 do the parts now as unit is no longer made
 
cheers for that i presuming it would be cheaper to buy second hand box and put that in then:(
 
most likely, a disco1.222 t/box would keep your top end as is but obviously higher at bottom as well which may or may not be an issue depending on your use
 
Last edited:
Back
Top